A chiller is a device that removes heat from a liquid (usually water) based on the compression or absorption of the compressed air cycle. This liquid can be used for cooling the air or devices, which usually flows in a cylinder and inside a heat exchanger. As an important secondary product, heat that is absorbed from the liquid or should be repelled to the environment or used for higher thermal performance. There are concerns about the design and selection of chillers. These concerns include performance, efficiency, maintenance, and environmental vulnerabilities.
1 - Compressor type capacity of 5 tons to 24 tons in 25 different models.
2- Shell and tube type (Copper tube with Aluminum spiral star), which is tested under PSI 300 pressure, in two ways:
A - with a standard condenser and shell type
B) with air condenser (calculated according to the weather condition of the design area and capacity)
- Air type with fan-shaped fan-shaped fiberglass, designed and calculated at an angle, and designed for the required amount of CFM available to cool the fryer gas, along with cold-run liquid storage tanks (RISPORT TANK), which are tested under the 350P.8.1 test. To make Another feature of this condenser is its complete stacking (furnace), and the other thing is that all connections of the condenser body are assembled into screws and beads.
Google Translate for Business:Translator ToolkitWebsite Translator
About Google TranslateCommunityMobileAbout GooglePrivacy & TermsHelpSend feedback